Linux 进程管理与监控(supervisor and monit)

本文发布时间: 2019-Mar-22
一、Supervisor1、安装宿主机环境:( Centos 6.5 )pip2.7 install supervisor2、创建配置文件通过 echo_supervisord_conf 命令来创建配置文件:echo_supervisord_conf >/etc/supervisord.conf3、主配置文件基本参数[unix_http_server]file=/var/run/supervisor/supervisor.sockchmod=0700chown=www:wwwusername=adminpassword=123456[supervisord]logfile=/var/log/supervisord.loglogfile_maxbytes=50MBlogfile_backups=10loglevel=infopidfile=/var/run/supervisor/supervisord.pidnodaemon=falseminfds=1024minprocs=200[rpcinterface:supervisor]supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface[supervisorctl]serverurl=unix:///var/run/supervisor/supervisor.sock[include]files=/etc/supervisord_child/*.ini4、配置一个进程监控[program:CommentMsg]command= /bin/php /test/art Comment:msgprocess_name=%(process_num)02dnumprocs=5autostart=trueautorestart=truestartsecs=2startretries=10redirect_stderr=truestdout_logfile=/var/log/supervisor/CommentMsg.logstdout_logfile_maxbytes=10MBstdout_logfile_backups=10配置多个进程监控[program:CommentMsg]command= /bin/php /test/art Comment:msgprocess_name=%(process_num)02dnumprocs=5autostart=trueautorestart=truestartsecs=2startretries=10redirect_stderr=truestdout_logfile=/var/log/supervisor/CommentMsg.logstdout_logfile_maxbytes=10MBstdout_logfile_backups=10[program:showAdd]command= /bin/php /test/artg showAddprocess_name=%(process_num)02dnumprocs=5autostart=trueautorestart=truestartsecs=2startretries=10redirect_stderr=truestdout_logfile=/var/log/supervisor/showAdd.logstdout_logfile_maxbytes=10MBstdout_logfile_backups=10启动服务1supervisord -c /etc/supervisord.conf5、supervisorctl 常用指令update :重新读取配置文件,且不会影响正在运行的程序;start :启用进程stop :停止进程restart :重启进程reload :重新载入配置文件,并重启所有管理的进程。status :查看状态6、配置文件所有参数详解引用:http://lixcto.blog.51cto.com/4834175/1539136[unix_http_server]file=/tmp/supervisor.sock ; socket文件的路径,supervisorctl用XML_RPC和supervisord通信就是通过它进行 的。如果不设置的话,supervisorctl也就不能用了 不设置的话,默认为none。 非必须设置;chmod=0700 ; 这个简单,就是修改上面的那个socket文件的权限为0700 不设置的话,默认为0700。 非必须设置;chown=nobody:nogroup ; 这个一样,修改上面的那个socket文件的属组为user.group 不设置的话,默认为启动supervisord进程的用户及属组。非必须设置;username=user ; 使用supervisorctl连接的时候,认证的用户 不设置的话,默认为不需要用户。 非必须设置;password=123 ; 和上面的用户名对应的密码,可以直接使用明码,也可以使用SHA加密 如:{SHA}82ab876d1387bfafe46cc1c8a2ef074eae50cb1d 默认不设置。。。非必须设置;[inet_http_server] ; 侦听在TCP上的socket,Web Server和远程的supervisorctl都要用到他 不设置的话,默认为不开启。非必须设置;port=127.0.0.1:9001 ; 这个是侦听的IP和端口,侦听所有IP用 :9001或*:9001。 这个必须设置,只要上面的[inet_http_server]开启了,就必须设置它;username=user ; 这个和上面的uinx_http_server一个样。非必须设置;password=123 ; 这个也一个样。非必须设置[supervisord] ;这个主要是定义supervisord这个服务端进程的一些参数的 这个必须设置,不设置,supervisor就不用干活了logfile=/tmp/supervisord.log ; 这个是supervisord这个主进程的日志路径,注意和子进程的日志不搭嘎。 默认路径$CWD/supervisord.log,$CWD是当前目录。。非必须设置logfile_maxbytes=50MB ; 这个是上面那个日志文件的最大的大小,当超过50M的时候,会生成一个新的日 志文件。当设置为0时,表示不限制文件大小 默认值是50M,非必须设置。logfile_backups=10 ; 日志文件保持的数量,上面的日志文件大于50M时,就会生成一个新文件。文件 数量大于10时,最初的老文件被新文件覆盖,文件数量将保持为10 当设置为0时,表示不限制文件的数量。 默认情况下为10。。。非必须设置loglevel=info ; 日志级别,有critical, error, warn, info, debug, trace, or blather等 默认为info。。。非必须设置项pidfile=/tmp/supervisord.pid ; supervisord的pid文件路径。 默认为$CWD/supervisord.pid。。。非必须设置nodaemon=false ; 如果是true,supervisord进程将在前台运行 默认为false,也就是后台以守护进程运行。。。非必须设置minfds=1024 ; 这个是最少系统空闲的文件描述符,低于这个值supervisor将不会启动。 系统的文件描述符在这里设置cat /proc/sys/fs/file-max 默认情况下为1024。。。非必须设置minprocs=200 ; 最小可用的进程描述符,低于这个值supervisor也将不会正常启动。 ulimit -u这个命令,可以查看linux下面用户的最大进程数 默认为200。。。非必须设置;umask=022 ; 进程创建文件的掩码 默认为022。。非必须设置项;user=chrism ; 这个参数可以设置一个非root用户,当我们以root用户启动supervisord之后。 我这里面设置的这个用户,也可以对supervisord进行管理 默认情况是不设置。。。非必须设置项;identifier=supervisor ; 这个参数是supervisord的标识符,主要是给XML_RPC用的。当你有多个 supervisor的时候,而且想调用XML_RPC统一管理,就需要为每个 supervisor设置不同的标识符了 默认是supervisord。。。非必需设置;directory=/tmp ; 这个参数是当supervisord作为守护进程运行的时候,设置这个参数的话,启动 supervisord进程之前,会先切换到这个目录 默认不设置。。。非必须设置;nocleanup=true ; 这个参数当为false的时候,会在supervisord进程启动的时候,把以前子进程 产生的日志文件(路径为AUTO的情况下)清除掉。有时候咱们想要看历史日志,当 然不想日志被清除了。所以可以设置为true 默认是false,有调试需求的同学可以设置为true。。。非必须设置;childlogdir=/tmp ; 当子进程日志路径为AUTO的时候,子进程日志文件的存放路径。 默认路径是这个东西,执行下面的这个命令看看就OK了,处理的东西就默认路径 python -c "import tempfile;print tempfile.gettempdir()" 非必须设置;environment=KEY="value" ; 这个是用来设置环境变量的,supervisord在linux中启动默认继承了linux的 环境变量,在这里可以设置supervisord进程特有的其他环境变量。 supervisord启动子进程时,子进程会拷贝父进程的内存空间内容。 所以设置的 这些环境变量也会被子进程继承。 小例子:environment=name="haha",age="hehe" 默认为不设置。。。非必须设置;strip_ansi=false ; 这个选项如果设置为true,会清除子进程日志中的所有ANSI 序列。什么是ANSI 序列呢?就是我们的 , 这些东西。 默认为false。。。非必须设置; the below section must remain in the config file for RPC; (supervisorctl/web interface) to work, additional interfaces may be; added by defining them in separate rpcinterface: sections[rpcinterface:supervisor] ;这个选项是给XML_RPC用的,当然你如果想使用supervisord或者web server 这 个选项必须要开启的supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface[supervisorctl] ;这个主要是针对supervisorctl的一些配置serverurl=unix:///tmp/supervisor.sock ; 这个是supervisorctl本地连接supervisord的时候,本地UNIX socket 路径,注意这个是和前面的[unix_http_server]对应的 默认值就是unix:///tmp/supervisor.sock。。非必须设置;serverurl=http://127.0.0.1:9001 ; 这个是supervisorctl远程连接supervisord的时候,用到的TCP socket路径 注意这个和前面的[inet_http_server]对应 默认就是http://127.0.0.1:9001。。。非必须项;username=chris ; 用户名 默认空。。非必须设置;password=123 ; 密码 默认空。。非必须设置;prompt=mysupervisor ; 输入用户名密码时候的提示符 默认supervisor。。非必须设置;history_file=~/.sc_history ; 这个参数和shell中的history类似,我们可以用上下键来查找前面执行过的命令 默认是no file的。。所以我们想要有这种功能,必须指定一个文件。。。非 必须设置; The below sample program section shows all possible program subsection values,; create one or more 'real' program: sections to be able to control them under; supervisor.;[program:theprogramname] ;这个就是咱们要管理的子进程了,":"后面的是名字,最好别乱写和实际进程 有点关联最好。这样的program我们可以设置一个或多个,一个program就是 要被管理的一个进程;command=/bin/cat ; 这个就是我们的要启动进程的命令路径了,可以带参数 例子:/home/test.py -a 'hehe' 有一点需要注意的是,我们的command只能是那种在终端运行的进程,不能是 守护进程。这个想想也知道了,比如说command=service httpd start。 httpd这个进程被linux的service管理了,我们的supervisor再去启动这个命令 这已经不是严格意义的子进程了。 这个是个必须设置的项;process_name=%(program_name)s ; 这个是进程名,如果我们下面的numprocs参数为1的话,就不用管这个参数 了,它默认值%(program_name)s也就是上面的那个program冒号后面的名字, 但是如果numprocs为多个的话,那就不能这么干了。想想也知道,不可能每个 进程都用同一个进程名吧。;numprocs=1 ; 启动进程的数目。当不为1时,就是进程池的概念,注意process_name的设置 默认为1 。。非必须设置;directory=/tmp ; 进程运行前,会前切换到这个目录 默认不设置。。。非必须设置;umask=022 ; 进程掩码,默认none,非必须;priority=999 ; 子进程启动关闭优先级,优先级低的,最先启动,关闭的时候最后关闭 默认值为999 。。非必须设置;autostart=true ; 如果是true的话,子进程将在supervisord启动后被自动启动 默认就是true 。。非必须设置;autorestart=unexpected ; 这个是设置子进程挂掉后自动重启的情况,有三个选项,false,unexpected 和true。如果为false的时候,无论什么情况下,都不会被重新启动, 如果为unexpected,只有当进程的退出码不在下面的exitcodes里面定义的退 出码的时候,才会被自动重启。当为true的时候,只要子进程挂掉,将会被无 条件的重启;startsecs=1 ; 这个选项是子进程启动多少秒之后,此时状态如果是running,则我们认为启 动成功了 默认值为1 。。非必须设置;startretries=3 ; 当进程启动失败后,最大尝试启动的次数。。当超过3次后,supervisor将把 此进程的状态置为FAIL 默认值为3 。。非必须设置;exitcodes=0,2 ; 注意和上面的的autorestart=unexpected对应。。exitcodes里面的定义的 退出码是expected的。;stopsignal=QUIT ; 进程停止信号,可以为TERM, HUP, INT, QUIT, KILL, USR1, or USR2等信号 默认为TERM 。。当用设定的信号去干掉进程,退出码会被认为是expected 非必须设置;stopwaitsecs=10 ; 这个是当我们向子进程发送stopsignal信号后,到系统返回信息 给supervisord,所等待的最大时间。 超过这个时间,supervisord会向该 子进程发送一个强制kill的信号。 默认为10秒。。非必须设置;stopasgroup=false ; 这个东西主要用于,supervisord管理的子进程,这个子进程本身还有 子进程。那么我们如果仅仅干掉supervisord的子进程的话,子进程的子进程 有可能会变成孤儿进程。所以咱们可以设置可个选项,把整个该子进程的 整个进程组都干掉。 设置为true的话,一般killasgroup也会被设置为true。 需要注意的是,该选项发送的是stop信号 默认为false。。非必须设置。。;killasgroup=false ; 这个和上面的stopasgroup类似,不过发送的是kill信号;user=chrism ; 如果supervisord是root启动,我们在这里设置这个非root用户,可以用来 管理该program 默认不设置。。。非必须设置项;redirect_stderr=true ; 如果为true,则stderr的日志会被写入stdout日志文件中 默认为false,非必须设置;stdout_logfile=/a/path ; 子进程的stdout的日志路径,可以指定路径,AUTO,none等三个选项。 设置为none的话,将没有日志产生。设置为AUTO的话,将随机找一个地方 生成日志文件,而且当supervisord重新启动的时候,以前的日志文件会被 清空。当 redirect_stderr=true的时候,sterr也会写进这个日志文件;stdout_logfile_maxbytes=1MB ; 日志文件最大大小,和[supervisord]中定义的一样。默认为50;stdout_logfile_backups=10 ; 和[supervisord]定义的一样。默认10;stdout_capture_maxbytes=1MB ; 这个东西是设定capture管道的大小,当值不为0的时候,子进程可以从stdout 发送信息,而supervisor可以根据信息,发送相应的event。 默认为0,为0的时候表达关闭管道。。。非必须项;stdout_events_enabled=false ; 当设置为ture的时候,当子进程由stdout向文件描述符中写日志的时候,将 触发supervisord发送PROCESS_LOG_STDOUT类型的event 默认为false。。。非必须设置;stderr_logfile=/a/path ; 这个东西是设置stderr写的日志路径,当redirect_stderr=true。这个就不用 设置了,设置了也是白搭。因为它会被写入stdout_logfile的同一个文件中 默认为AUTO,也就是随便找个地存,supervisord重启被清空。。非必须设置;stderr_logfile_maxbytes=1MB ; 这个出现好几次了,就不重复了;stderr_logfile_backups=10 ; 这个也是;stderr_capture_maxbytes=1MB ; 这个一样,和stdout_capture一样。 默认为0,关闭状态;stderr_events_enabled=false ; 这个也是一样,默认为false;environment=A="1",B="2" ; 这个是该子进程的环境变量,和别的子进程是不共享的;serverurl=AUTO ;; The below sample eventlistener section shows all possible; eventlistener subsection values, create one or more 'real'; eventlistener: sections to be able to handle event notifications; sent by supervisor.;[eventlistener:theeventlistenername] ;这个东西其实和program的地位是一样的,也是suopervisor启动的子进 程,不过它干的活是订阅supervisord发送的event。他的名字就叫 listener了。我们可以在listener里面做一系列处理,比如报警等等 楼主这两天干的活,就是弄的这玩意;command=/bin/eventlistener ; 这个和上面的program一样,表示listener的可执行文件的路径;process_name=%(program_name)s ; 这个也一样,进程名,当下面的numprocs为多个的时候,才需要。否则默认就 OK了;numprocs=1 ; 相同的listener启动的个数;events=EVENT ; event事件的类型,也就是说,只有写在这个地方的事件类型。才会被发送;buffer_size=10 ; 这个是event队列缓存大小,单位不太清楚,楼主猜测应该是个吧。当buffer 超过10的时候,最旧的event将会被清除,并把新的event放进去。 默认值为10。。非必须选项;directory=/tmp ; 进程执行前,会切换到这个目录下执行 默认为不切换。。。非必须;umask=022 ; 淹没,默认为none,不说了;priority=-1 ; 启动优先级,默认-1,也不扯了;autostart=true ; 是否随supervisord启动一起启动,默认true;autorestart=unexpected ; 是否自动重启,和program一个样,分true,false,unexpected等,注意 unexpected和exitcodes的关系;startsecs=1 ; 也是一样,进程启动后跑了几秒钟,才被认定为成功启动,默认1;startretries=3 ; 失败最大尝试次数,默认3;exitcodes=0,2 ; 期望或者说预料中的进程退出码,;stopsignal=QUIT ; 干掉进程的信号,默认为TERM,比如设置为QUIT,那么如果QUIT来干这个进程 那么会被认为是正常维护,退出码也被认为是expected中的;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10);stopasgroup=false ; send stop signal to the UNIX process group (default false);killasgroup=false ; SIGKILL the UNIX process group (def false);user=chrism ;设置普通用户,可以用来管理该listener进程。 默认为空。。非必须设置;redirect_stderr=true ; 为true的话,stderr的log会并入stdout的log里面 默认为false。。。非必须设置;stdout_logfile=/a/path ; 这个不说了,好几遍了;stdout_logfile_maxbytes=1MB ; 这个也是;stdout_logfile_backups=10 ; 这个也是;stdout_events_enabled=false ; 这个其实是错的,listener是不能发送event;stderr_logfile=/a/path ; 这个也是;stderr_logfile_maxbytes=1MB ; 这个也是;stderr_logfile_backups ; 这个不说了;stderr_events_enabled=false ; 这个也是错的,listener不能发送event;environment=A="1",B="2" ; 这个是该子进程的环境变量 默认为空。。。非必须设置;serverurl=AUTO ; override serverurl computation (childutils); The below sample group section shows all possible group values,; create one or more 'real' group: sections to create "heterogeneous"; process groups.;[group:thegroupname] ;这个东西就是给programs分组,划分到组里面的program。我们就不用一个一个去操作了 我们可以对组名进行统一的操作。 注意:program被划分到组里面之后,就相当于原来 的配置从supervisor的配置文件里消失了。。。supervisor只会对组进行管理,而不再 会对组里面的单个program进行管理了;programs=progname1,progname2 ; 组成员,用逗号分开 这个是个必须的设置项;priority=999 ; 优先级,相对于组和组之间说的 默认999。。非必须选项; The [include] section can just contain the "files" setting. This; setting can list multiple files (separated by whitespace or; newlines). It can also contain wildcards. The filenames are; interpreted as relative to this file. Included files *cannot*; include files themselves.;[include] ;这个东西挺有用的,当我们要管理的进程很多的时候,写在一个文件里面 就有点大了。我们可以把配置信息写到多个文件中,然后include过来;files = relative/directory/*.ini7、常见错误总结BACKOFF Exited too quickly (process log may have details)由于supervisor 比较适合监控业务应用,且只能监控前台程序,php fork方式实现的daemon和其他的daemon程序不能用它监控,否则就会出现偶尔报错。假如 redis 需要用supervisor监控,需要在redis主配置文件中,将其修改为非daemon模式启动。更多详细用法见官网: http://supervisord.org/二、Monit monit是一个开源的轻量级监控工具,功能十分强大。可以从多个层面进行监控,可以自动维护进程,发送邮件报警等。系统监控:进程状态,系统负载,cpu负载,内存占用等。进程监控:monit可以监控守护进程,当被监控进程异常退出时,可以自动被拉起。文件系统:Monit可以监控本地文件、目录、文件系统的变化,包括时间戳、校验值、大小的变化。例如,可以监控文件sha1以及md5的值,来监控文件是否发生变化网络监控:monit可以监控网络连接,支持TCP、UDP、Unix domain sockets以及HTTP、SMTP等。 monit 官网:https://mmonit.com/monit/1、程序安装# 安装方式分为两种# 使用 yum 安装yum install monit -y# 源码安装tar xf monit-5.18.tar.gzcd monit-5.18./configure --prefix=/usr/local/monitmake && make install# 提供主配置文件cp monitrc /etc/monitrc2、配置应用解析主配置文件:/etc/monitrc################################################################################# Monit control file################################################################################ 检查周期,默认为2分钟,可以根据需要自行调节,这里改成30秒。set daemon 30# 日志文件set logfile /var/log/monit.log# 设置邮件服务器set mailserver 'smtp.163.com' # 指定邮件服务器地址,IP or HostName port 465 using ssl username '[email protected]' password '123456'# 设置告警邮件的接收地址set alert [email protected]# 设置邮件格式set mail-format { from: [email protected] # 邮件发送人 subject: monit alert -- $EVENT $SERVICE message: $EVENT Service $SERVICE Date: $DATE Action: $ACTION Host: $HOST Description: $DESCRIPTION Your faithful employee, Monit}# monit内置了一个Web页面的状态监视set httpd port 2812 and use address 0.0.0.0 # 设置监听的IP allow 115.116.139.162 # 设置允许访问的IP allow localhost allow 192.168.0.0/16 allow admin:monit # 设置用于访问验证的用户名:密码# 可以包含扩展配置文件,便于配置的分类管理include /etc/monit.d/*系统运行状况监控system_base.conf# 主机名,可以是IP或者域名(其他为默认参数,可以根据自己需求微调)check system www.example.com if loadavg (1min) > 4 then alert if loadavg (5min) > 2 then alert if memory usage > 75% then alert if cpu usage (user) > 70% then alert if cpu usage (system) > 30% then alert if cpu usage (wait) > 20% then alert监控Nginxnginx_monit.conf# 提供主进程pid文件check process nginx with pidfile /alidata/server/nginx/logs/nginx.pid # 进程启动命令,必须写绝对路径 start program = "/etc/init.d/nginx start" with timeout 30 seconds # 进程关闭命令 stop program = "/etc/init.d/nginx stop"# 端口状态检测,当状态返回异常,则重启服务。 if failed host 115.116.139.162 port 8081 protocol http then restart# 当端口状态异常,报警 if failed host 115.116.139.162 port 8081 protocol http then alert# 在5个监视周期中,重启了服务3次,则超时不再监视。 因为如果重启了多次不成功,很有可能继续重启下去也不会成功,避免一直无效的重启,白白消耗系统资源影响主机上其他进程的工作,这时应该通知人工处理。 if 3 restarts within 5 cycles then timeout# 如果在5个监视周期内,该服务的CPU使用率都超过90%则告警。 if cpu usage > 90% for 5 cycles then alert# 设置分组,可选 group server# 可选的ssl端口的监控,如果有的话# if failed port 443 type tcpssl protocol http# with timeout 15 seconds# then restart监控Apacheapache_monit.confcheck process apache with pidfile /var/run/apache2.pid start program = "/etc/init.d/apache2 start" stop program = "/etc/init.d/apache2 stop" # Apache 耗系统资源比较厉害,额外添加一些关于这方面的监控设置 if cpu > 50% for 2 cycles then alert if cpu > 70% for 5 cycles then restart if totalmem > 1500 MB for 10 cycles then restart if children > 250 then restart if loadavg(5min) greater than 10 for 20 cycles then stop if failed host www.example.com port 8080 protocol http then restart if 3 restarts within 5 cycles then timeout group server # 可选,依赖于nginx depends on nginx监控spawn-fcgi程序check process spawn-fcgi with pidfile /var/run/spawn-fcgi.pid # spawn-fcgi一定要带-P参数才会生成pid文件,默认是没有的 start program = "/usr/bin/spawn-fcgi -a 127.0.0.1 -p 8081 -C 10 -u userxxx -g groupxxx -P /var/run/spawn-fcgi.pid -f /usr/bin/php-cgi" stop program = "/usr/bin/killall /usr/bin/php-cgi" # fast-cgi走的不是http协议,monit的protocol参数也没有cgi对应的设置,这里去掉protocol http即可。 if failed host 127.0.0.1 port 8081 then restart if 3 restarts within 5 cycles then timeout group server depends on nginx监控sshcheck process sshd with pidfile /var/run/sshd.pid start program "/etc/init.d/sshd start" stop program "/etc/init.d/sshd stop" if failed port 22 protocol SSH then restart if 5 restarts within 5 cycles then timeout监控MySQLmysql_monit.confcheck process mysql with pidfile /var/run/mysqld/mysqld.pid start program = "/etc/init.d/mysqld start" stop program = "/etc/init.d/mysqld stop" if failed host 127.0.0.1 port 3306 then restart if 5 restarts within 5 cycles then timeout设置开启启动echo '/usr/local/monit/bin/monit -c /etc/monitrc' >> /etc/rc.d/rc.localmonit 命令行操作monit start nginx 启动进程monit stop nginx 关闭进程monit -h 查看帮助


(以上内容不代表本站观点。)
---------------------------------
本网站以及域名有仲裁协议。
本網站以及域名有仲裁協議。

2024-Mar-04 02:08pm
栏目列表